BYD Dolphin 2022 - Adjustment of Front Seat

64 3-2 Seats
Warm tip
 Be careful not to damage the seat belt when folding a rear seat.
Check if the buckle is properly fitted in the buckle slot on the
cushion.
 Do not fasten the seat belt before adjusting the seat.
 Do not make the seat hit any passenger or luggage when adjusting
the seat.
 When measuring the cushion depth, keep in mind that the front and
back positions of the seat are the final travel positions of the slide
rail and the design backrest angle is 25˚.
 When measuring the width of seat cushion, adjust the backrest
angle to the design state (second-row seat backrest angle: 27°), and
adjust the seat slide rail (if any) to the final position. For seats in the
same row that can be separated and combined, consider them as a
whole row of seats during measurement of cushion width.
Adjustment of Front Seat
Electric adjustment of front seat (if any)
The electric adjustment of front seat includes forward-backward
adjustment, upward-downward adjustment (if any) and backrest angle
adjustment. The following adjustment method can be available
depending on the functions of your vehicle.
① Seat position adjustment switch
■ Move the seat position
adjustment switch
forward/backward to adjust
the seat forward/backward.
■ Move the rear end of the
adjustment switch
upward/downward to adjust
the height of the seat
cushion.
② Seat backrest angle adjustment
switch
■ Swing the backrest angle adjustment switch forward/backward
to adjust the seat backrest angle.