EasyManua.ls Logo

BYD Dolphin 2022 - Page 65

BYD Dolphin 2022
238 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3-2 Seats 65
3
Operation of Controller
Warm tip
Release the button to locate the seat. Do not put any object under
the seat. Otherwise, the seat being adjusted may be hindered from
moving.
Heating and ventilation system (if any)
The heating and ventilation system can be turned on or off by
“Seat ventilation / heating operating the button on the multimedia
screen.
Tap "Drop-down" on the home page of the multimedia system to
operate the seat heating and ventilation setting buttons.
Adjustment of heating system
Seat heating: Operate the seat heating switch on the multimedia
touch screen to control the heating cushion working modes: high
and low temperature modes.
After the vehicle is powered up, the heating indicator is initially
off;
Press the switch for the first time to make the seat heater work
in the high temperature mode and two heating indicators will
illuminate at the same time;
Press it for the second time to make the seat heating cushion
work in the low temperature mode, and the first indicator will
illuminate while the second indicator will go out.
Press it for the third time to deactivate the heating function and
both indicators will go out.
Adjustment of ventilation system
Seat ventilation: Operate the seat ventilation switch on the
multimedia touch screen to control the ventilator working modes:
high and low speed ventilation modes.
After the vehicle is powered up, the ventilation indicator is initially
off.
Press the switch for the first time to make the seat ventilator work in
the high speed mode and two corresponding ventilation indicators
illuminate.
Press it for the second time to make the seat ventilator work in the
low speed mode, and the first indicator will illuminate while the
second indicator will go out.

Table of Contents