4-1 Charging/Discharging Instructions 93
Charging
stops in the
charging
process
Power supply is
disconnected
Within a certain period of time, when power
supply resumes, the charging equipment will
restart charging.
Power battery
temperature high
The charging equipment will stop charging
automatically if the alarm light, which is on
the combination instrument and indicates an
excessively high temperature of the power
battery, is on. Recharge after the battery
cools down.
The vehicle or
charging pile is faulty
Contact a BYD authorized service provider
after confirming that there is a prompt of the
fault of charging pile or vehicle.
Charging Method
■ Inspection before charging;
Make sure that the charging device has no abnormalities such as
cracked housing, worn cable, rusted plug or foreign object.
Do not charge when the connection of the charging connection device
becomes loose.
Make sure that there is no water or foreign object in the charging port,
and the metal terminal is not rusted or corroded.
■ If any of the above conditions occurs, charging is prohibited; otherwise, it may
cause short circuit or electric shock, resulting in personal injury.
AC charging with household portable equipment
1. Description of equipment
■ It connects the vehicle and the
standard household single-phase
two-pole socket (220V, 50Hz, 10A)
with grounding to charge the
vehicle.
■ A household socket complying with the relevant national standards should be
selected as the power supply socket to prevent high-power charging from
damaging the circuit and causing protective tripping that may affect the
normal service of other equipment.
■ The equipment consists of power supply plug, charging plug, charging plug
protection cover, and charging cable in line with the national standard ("3-pin
to 7-pin" for short). The power supply plug is connected to the household
standard power supply socket, and the charging plug is connected to the
vehicle charging port.
To Next Page
