REGULAR INSPECTION AND MAINTENANCE
OPERATOR MANUAL 90
Front Wheels Replacement
1. Park the forklift on the level floor, apply the handbrake, switch off the forklift, remove the
key and press down the emergency disconnect switch.
2. Jack up the forklift until the tires are off the ground and loosen the wheel nuts.
3. Remove the wheel nuts and wheels.
4. When installing the wheels back on, follow the reverse procedures (Torque: 147.6 ft-lbs).
Rear Wheels Replacement
1. Park the forklift on the level floor, apply the handbrake, switch off the forklift, remove the
key and press down the emergency disconnect switch.
2. Jack up the forklift until the tires are off the ground and loosen the wheel bolts.
3. Remove the wheel bolts and wheels.
4. When installing the wheels back on, follow the reverse procedures(Torque: 118.08 ft-lbs).
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...
