ECB16 ECB18
75 OM-ECB162015006-EN-US
Weekly Inspection
Checklist and Time Interval
If the forklifts work less than 40 hours per week, conduct the following inspection on weekly
basis. otherwise conduct the inspection every 40 hours. For details, please see "REGULAR
INSPECTION AND MAINTENANCE".
Weekly (or every 40 hours) inspection checklist:
Inspection Items Content
Electric System Inspection Connector, fuses, connect bars, Relays
Tires Wheel, fasten parts
Braking System Braking fluid, handbrake, brake pedal
Electric System Inspection
1. Check connectors.
2. check fuses and connect bars of the main controller.
3. check fuses and relays in the fuses box.
WARNING
Disconnect the battery before checking the electric system.
Tires
1. Check on a daily basis (every 8 hours) if the wheel nuts are secured or loose. Fasten
them if they are loose.
2. Take out debris embedded in the tire.
3. If the four tires are unevenly worn, or the tires are found damaged, or the rims are bent,
then replace the tires.
Braking System
1. Fully depress and then release the braking pedal and check if there is any abnormality.
2. Check if the parking brake works properly when it is applied. Check the operating force
needed to fully apply the parking brake by using an ergometer. Check for abnormal wear
on the parking brake.
3. Check the braking fluid level and see if it reaches 2/3 of the braking fluid cup. Add
braking fluid if it does not reach 2/3 of the braking fluid cup.
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...
