DAILY OR WEEKLY CHECK AND INSPECTION
OPERATOR MANUAL 72
Daily Inspection
Checklist and Time Interval
If the forklifts works less than 8 hours per day, conduct the following inspection and checks on
a daily basis. if daily working hours exceed 8 hours, conduct the following inspection and checks
every 8 hours. For details, please see "REGULAR INSPECTION AND MAINTENANCE".
Daily (or every 8 hours) inspection checklist:
Inspection Items Content
Forklift Exterior Body
Tires Wheel nuts and bolts
Working Equipment Cylinder, hoses, mast, forks
Hydraulic System Hydraulic oil level, filter indicator
Seat Seat belt
Multifunction Display Indicators
Lighting, Horn And Warning Equipments Lights combination, horn, reverse lights, reverse beeper
Braking System Braking fluid, handbrake, brake pedal
Driving System And Controlling System Steering wheel, mechanical levers
Counterweight Counterweight bolts and the tow pin
Others Others
CAUTION
These inspections should be conducted before operating the forklift.
Note
1. Before conducting the daily inspection, recheck for any fault and error found earlier.
Forklift Exterior
1. Check the forklift truck body for damage and deformation.
2. Check the floor where the forklift is parked for oil leakage.
Note
If oil leakage occurs, confirm the location of the oil leakage and contact the BYD after sales
service.
Tires
1. Check on a daily basis (every 8 hours) if the wheel nuts are secured or loose. Fasten
them if they are loose.
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...
