BYD ECB16 - Lights, Horn and Other Warning Equipment; Braking System; Driving System and Controlling System; Counterweight

DAILY OR WEEKLY CHECK AND INSPECTION
OPERATOR MANUAL 74
4. Check if the turning indicator signs appear when the turning indicator is activated.
5. Check if the 3 control buttons on the instrument panel functions properly.
Lights, Horn and Other Warning Equipment
1. Check if working lights work properly.
2. Check if turning indicators work properly.
3. Set the travel direction control switch to “Reverse” and check if reversing lights work and
reversing beeper sounds.
4. Press horn to see if it works.
5. Check if other warning equipments work properly.
Braking System
1. Fully depress and then release the braking pedal and check if there is any abnormality.
2. Check if the parking brake works properly when it is applied. Check the operating force
needed to fully apply the parking brake by using an ergometer. Check for abnormal wear
on the parking brake.
3. Check the braking fluid level and see if it reaches 2/3 of the braking fluid cup. Add
braking fluid if it does not reach 2/3 of the braking fluid cup.
Driving System and Controlling System
1. Turn the steering wheel clockwise and anti-clockwise and check if the steering is smooth.
2. Operate the mechanical levers and check if lifting and tilting are smooth.
3. Depress the acceleration pedal to see if the forklift can accelerate normally.
4. Check for abnormal sounds during forklift operation.
Counterweight
1. Check the counterweight bolts.
2. Check the tow pin.
Others
Check if there are others problems.
https://www.forkliftpdfmanuals.com/