C-COM Satellite Systems iNetVu 7710 - Page 152

C-COM Satellite Systems Inc.
iNetVu™ 7710 Controller User Manual
152
0XF000
CANBUS communication (PL) Failed
System Peaking
0X4011
Quadratic peaking step 1
0X4012
Quadratic peaking step 2
0X4013
Quadratic peaking step 3
0X4014
Quadratic peaking step 4
0X4015
Quadratic peaking step 5
0X4016
Quadratic peaking step 6
0X4018
Split window Search
Compass Restore
0X4060
0/1 compass reading and no movement for
compass restoring
0X4061
Compass reading is ok after compass
restore
0X4062
The first movement for compass restore
0X4063
Compass reading is ok or compass is a
legacy compass where restoring is not valid
0X4064
Compass reading is ok after moving
0X4065
The second movement for compass restore
Unattended Operation
0X9100
Can't find satellite automatically (UN)
0X9101
Didn't find satellite (UN)
0X9102
Can't stow (UN)
iNetVu NAV Compass
0X600C
Save compass calibration data has finished
0X600D
Compass Restoring Finished
0X600E
Compass Calibration Enabled
0X600F
Compass Calibration Disabled
0X6020
Auto Calibration Finished
0X6021
Auto Check Compass Finished