C.P.Bourg BM-e - 3.6.5 Wire jam in the stitching head

To Next Page

To Previous Page

Operator manual

Page 9 - 27

Initial version : 11/08

Lastest revision : -

3.6.5 Wire jam in the stitching head

If a missing stitch is noticed at the exit of the BME, there might be a wire jam in the head.

Apply the following instructions to clear jam and reinstall the wire.

For ISP stitching heads

1- Remove cassette with jam as follows.

2- Reinstall cassette (steps 3 and 4 of a new cassette install).

For Hohner stitching heads

See Head manuals.

9mm