Operator manual
Page 9 - 16
Initial version : 11/08
Lastest revision : 09/09
3.3.3 Technical specifications
Note:The figures below represent what the BME is capable of producing.
The device feeding paper to the BME may alter those specifications.
Type of paper
Any type of paper except paper with a window or transparent paper.
Coated / uncoated from 60 to 160 gsm.
Covers from 80 to 250 gsm (up to 350 gsm if the covers are creased).
Paper format
Productivity
- Up to 5000 sets/hour, in each case (stitching only, stitching & folding or stitching,
folding and trimming).
- Based on A4 format 80 gsm.
Note: The specified paper thickness figures are given for guidance only. The actual
performances of the machine will depend on the nature of the paper and covers used.
Min = 180mm (7.1")
Max = 600mm (23.6")
Min = 119mm (4.7")
Max = 370mm (14.6")
Min = 70mm (2.8")
Max = 300mm (11.8")
Min = 119mm (4.7")
Max = 370mm (14.6")
Min = 170mm (6.7")
Max = 300mm (11.8")
Min = 119mm (4.7")
Max = 370mm (14.6")
Max. trim = 25mm (1")
Saddle stitching
Top/side stitching
Folding/Trimming
For a format higher than or
equal to 190mm (95mm
folded)
PRODUCTIVITY
(books / h)
(over lap 15 mm)
EURO USA
A4 A3 8,5 / 11 11 / 17
5 sheets 5050 4350 5150 4300
10 sheets 4700 4100 4850 4050
15 sheets 4450 3900 4600 3900
To Next Page
Loading...