Operator manual
Page 9 - 50
Initial version : 11/08
Lastest revision : -
Save a job
When a job has been defined by the operator, it can be saved as follow.
Press button (4).
Enter a name for the job on the alphanumeric keyboard and confirm it by “ENTER”.
The new job appears in the left column.
If the name given already exists and that you press “enter”, a message will appear to
ask you to confirm the replacement of an existing file by the new one.
Press OUI/YES to replace the existing job by the new one or NON/NO to return to the
previous screen and rename the new job.
Note: Approximately 500 jobs can be saved.
4
To Next Page
Loading...