1 - This counter displays the total number of sets already done for the running job. Press
the button to enter a number of sets already made.
2 - Number of sets pre-defined. 0= X= infinity preset.
3 - Press this button to reset the counter to zero. Press button + or - to increase or
decrease the counter by 1.
4 - Activate or desactivate the preset. Press button + or - to increase or decrease the
counter by 1.
5 - Productivity display.Numbers of sets on conveyor by hour
Operator manual
Page 9 - 57
Initial version : 11/08
Lastest revision : 02/10
To Next Page
Loading...