CAL Controls 3300 - Function List - Levels 3 & 4; LED Indicator Modes and Sensor Adjustments; Control Accuracy Monitor and Autotune Data; Software Version and Factory Reset

Function List
REU.L
Select SP1/2 LED indicator modes
SP1 SP2
[1n.2n] Normal Normal
1i.2n Invert Normal
1n.2i Normal Invert
1i.2i Invert Invert
SPAN
[0.0] to ±25% sensor maximum
Sensor span adjust
For recalibrating to a remote standard e.g. External
Meter, data logger. See ADVANCED SETTINGS page 24,25.
ZERO
[0.0] to ±25% sensor f/s
Zero sensor error, see SPAn
CHEK
[oFF] on
Select control accuracy monitor
READ
[Var] hi Lo
Read control accuracy monitor
20
LEVEL 3 (continued)
TECH
[Ct A] CT b Ct 1 Ct 2 Ct 3
Ct 4 oS 1 uS oS 2
Read Autotune tuning cycle data (see figure, page 14)
VER
Software version number
RSET
[nonE] ALL
Resets all functions to factory settings
Caution: Note current configuration before using this
function, otherwise initial configuration and OEM
settings must be re-entered.