Calculated Industries 6425 User Manual

User’s Guide — 25
Storing / Recalling Multiple Measurements
Your DigiRoller
™
Plus II has a unique [Area#] key used for storing and
recalling multiple measurements. You can store length, width, height,
area, and volume for each of the nine [Area#] registers. You can recall
these measurements later, even if you turn off the DigiRoller
™
Plus II
(for example, to review your measurements back at the office).
When you recall your measurements, you can also view totals for each
(L, W, H, LxW, LxWxH, Wall Area).

Calculated Industries 6425 Specifications

General

Brand	Calculated Industries
Model	6425
Category	Measuring Instruments
Language	English