Calculated Industries 6425 User Manual

12 — DigiRoller
™
Plus II
Turning the Bell On/Off
The DigiRoller
™
Plus II has a built-in bell sound, which you can turn
on or off. The bell is only heard when you are using the Count/Auto
Count functions. To turn the bell on or off, press the following keys:
1. Press [Set] then [Light] keys to enter the Preference Mode.
2. The display will show Preference 1, “Bell On” setting.
Press [M+] or [M–] if you wish to turn the bell sound off.
3. Press the [RESET] key to exit.
Note: You may have trouble hearing the bell in noisy outdoor
settings.

Calculated Industries 6425 Specifications

General

Brand	Calculated Industries
Model	6425
Category	Measuring Instruments
Language	English