Calculated Industries 6425 User Manual

32 — DigiRoller
™
Plus II
Taking Wall Area Measurements
The DigiRoller
™
Plus II can calculate the total wall surface area of a
room. Wall area is defined as:
([Length x 2] x Height) + ([Width x 2] x Height)
You will only need to roll a length and width, and roll or set a height.
Then you can calculate the total wall surface area of that room. See
the “Taking Volume Measurements” section (page 22) for information
on rolling or setting a fixed height.

Calculated Industries 6425 Specifications

General

Brand	Calculated Industries
Model	6425
Category	Measuring Instruments
Language	English