Calix E7-2 Installation Guide

52
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
© Calix. All Rights Reserved.
c. Pat dry the filter using an absorbent towel or cloth.
d. Spray the filter with compressed air to remove any remaining moisture on the outside
of the filter.
Note: If the filter is badly worn, replace it with a new filter (available from Calix).
4. Reinstall the filter into the fan module, and then install the fan module into the E7-2
chassis.

Calix E7-2 Specifications

General

Brand	Calix
Model	E7-2
Category	Wireless Access Point
Language	English