Calorex Pro-Pac PPT45EHC - Health and Safety Warnings; Electrical Safety Precautions; Product Description

AIR/WATER HEAT PUMPS
MODELS Pro-Pac 30/45/70/90/140
The machines described wiin is manual are reverse cycle
air to water heat pumps, specifically designed for heating and
cooling swimming pool or potable water wi high water flow
rates. The units are tropically rated and can operate in ambient
temperatures from 7°C to 50°C. Machines described as PPTs
are fitted wi titanium water heat exchangers, titanium being
a highly corrosion resistant material.
Pro-Pac heater-chillers utilize non ozone depleting R134a
refrigerant, which is an ideal refrigerant for high ambient
temperature applications, and by correct selection will offer
reliable all year round swimming pool water temperature
control or potable water cooling.
The units are fully packaged and should be sited outside in a
well ventilated area.
Oer features include integral safety devices to protect e
heat pump from internal and external faults. Indicator lamps
indicate operating mode. An adjustable ermostat controls
water temperature. Also a 6 minute timer is incorporated. A 12
hour delay timer is incorporated into all machines, which aer a
power interruption or from initial start will prevent e machine
compressor(s) from starting for a 12 hour period. This feature
is to protect e compressors from liquid pumping which can
cause internal compressor damage.
IMPORTANT NOTE
Danerm Ltd. is an ISO9001:2000 certified company.
All Calorex Heat Pumps are CE approved.
4
SD566250 ISSUE 35
PR0-PAC SYSTEM OWNER INSTALLATION MANUAL
HEALTH AND SAFETY WARNING
This appliance can be used by children from eight years and above and persons wi reduced
physical, sensory or mental capabilities or lack of experience and knowledge if ey have been
given supervision or instruction concerning e use of e appliance in a safe way and understand
e hazards involved. Children should not play wi e appliance. Cleaning and maintenance shall
not be made by children wiout supervision.
Disconnect from e mains supply and wait ree minutes before removing panels and
commencing work on is machine.