12 ARGO Digital Broadcast IP Production Console
Control Surfaces
SURFACE DIMENSIONS AND ASSEMBLY
The Argo S and Argo Q control
surfaces can be customised in
terms of width and fader count,
and can be provided with a
number of stand and trim options.
Desk-top mounting
The control surface can be supplied
with no floor stand, or if supplied, the
floor stand can be removed to allow
for desk-top mounting, as shown in
Fig 1 for Argo S & Fig 3 for Argo Q
on the next page.
Floor stand options - Feet
The floor stands have been designed
to cater for various height options.
The standard 'Studio' floor stand
type, as shown in Fig 2 for Argo S
& Fig 4 for Argo Q on the next page
has adjustable feet for levelling and
as shown in Fig 2 the adjustable
feet may be placed in two different
positions to allow for either a 740mm
nominal fader surface height in
"Foot Position 1" or a 700mm
nominal fader surface height in
"Foot Position 2".
FIG 2 - FLOOR STAND FITTED ADJUSTABLE FEET, END ELEVATION ARGO S
FIG 1 - NO FLOOR STAND FITTED, END ELEVATION ARGO S
To Next Page
Loading...
