Need help?Do you have a question about the Cambridge Audio One+ and is the answer not in the manual?
General| Speaker Impedance | 8 Ohms |
|---|---|
| Input Impedance | 47k Ohms |
| Power Output | 30W per channel (8 Ohms) |
| Inputs | 1 x Optical, 1 x Coaxial, 1 x USB |
| Outputs | Headphone Output |
| Bluetooth | Yes |
| Headphone Output | Yes (3.5mm) |
| USB Input | USB Type B, 1.1 or higher |
Specific warnings regarding electrical hazards, fire risks, and proper use.
Instructions for ensuring adequate airflow to prevent overheating.
Guidelines for placing the unit to avoid heat, sunlight, and dust.
Guidance on connecting the unit to the correct power supply.
Warnings against overloading electrical outlets and cords.
Instructions on how to safely clean the unit.
Guidance on environmentally responsible battery disposal.
Safety notes for connecting loudspeakers.
Instructions to refer servicing to qualified personnel.
Specific instructions for fitting a UK mains plug.
Description of the unit's power on/off switch.
Location and function of the AC power input.
How to switch the unit between standby and active modes.
How to cycle through and select input sources.
How to view information on the front panel display.
How to insert and use SD cards for playback.
Location and function of the remote control sensor.
How to connect headphones and their impedance recommendations.
How to connect USB devices for playback.
How to connect external audio devices via the front panel.
How to insert CDs for playback.
The LCD screen used for functions and settings.
Buttons for accessing presets and track selection.
Buttons for skipping, scanning, playing, pausing, and stopping.
Rotary dial for adjusting volume and making selections.
Button to access audio adjustments and settings.
How to eject a disc using the remote.
How to switch the unit between standby and active modes.
Buttons for track selection and preset recall.
How to view information on the front panel display via remote.
Remote buttons for track skipping, scanning, and searching.
Controls for repeat, random, and program playback.
Remote controls for brightness, alarm, clock, and sleep functions.
Remote functions for controlling a docked iPod.
How to connect loudspeakers and impedance requirements.
Connecting the aerial for radio reception.
Connecting external audio sources like DVD players.
Connecting to recording devices.
Connecting an active subwoofer.
Connecting the iPod docking station.
Diagram showing connection for a powered subwoofer.
Initial setup and power-on procedure.
How to tune into and listen to radio stations.
Procedures for scanning DAB radio stations.
Information on compatibility with DAB+ radio broadcasts.
How to tune and listen to FM radio stations.
How to store and recall favorite radio stations.
How to adjust balance, bass, treble, and X-Bass.
How to set the unit's internal clock.
How to configure the alarm function.
How to set the automatic power-off timer.
How to play standard and recordable CDs.
How to find specific tracks or points within tracks.
How to play music files from USB, SD, or CD.
How to use repeat, random, and program playback functions.
How to connect and operate an iPod.
How to change regional settings and DAB function.
How to perform a factory reset of the unit.
Solutions for when the unit does not turn on.
How to resolve issues with the unit not reading discs.
Steps to take when there is no audio output.
Solutions for discs that skip during playback.
How to fix distorted audio output.
To Next Page
