12
(Skip/Scan)
Use for skipping between tracks during playback and also for menu/function adjustment.
These buttons are also used to scroll through available stations in DAB/FM mode and
for clock/alarm/sleep settings. For more information refer to 'Operating instructions'.
Play/Pause
Plays and pauses playback.
Stop/Eject
Stops music playback from SD, USB & CD. Press again to eject the disc in CD mode.
Note: To eject the disc in other modes, press and hold the button.
Volume/Select (rotary dial)
Use to increase/decrease the level of the sound from the outputs of the unit. This
control affects the level of the loudspeaker and the headphone output. It does not
affect the 'Tape Output' connection. Pushing the volume control in activates the 'Select'
function to accept the item/function on the display when pressed.
Note: One+ will remember the volume level when put in Standby if the volume level is
not greater than 10 (e.g volume level 1-10). However, if the unit has been put in
Standby with the volume level greater than 10, it will default to volume level 10 when
turned back on to prevent an excessive level on turn-on.
The rotary dial can also be used to change/tune radio stations by pressing the Menu
button first then turning the dial. Press the dial in to accept current station selected.
Menu
Press repeatedly to access and adjust balance, bass level, treble level and X–Bass.
Note: These settings are remembered when the unit is put into Standby mode.
12
16
15
14
13
Front panel controls (continued)
Remote control
One+ is supplied with a Navigator remote control. Insert
supplied AAA batteries to activate.
Alkaline batteries should always be used.
Eject
Ejects the disc from the unit.
Note: To eject the disc in other modes, press and hold the
button.
Standby/On
Switches the unit between low power Standby and On modes.
0-9 numeric buttons
The functions of these buttons differ depending on source
mode selected:
Tuner (DAB/FM) mode – Press to recall a preset. Press and
hold to store a preset.
CD/USB/SD mode – Press the number of the desired track.
The playback will start from the beginning of the track.
Info
Press to select and view different information on the front panel
display. The information displayed depends on the current
source selected. Refer to previous section on front panel Info
button for more information.
To Next Page
Loading...
