EasyManua.ls Logo

Cambridge Audio One+ - Technical specifications

Cambridge Audio One+
25 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24
ENGLISH
Power output 25 watts (into 8Ω)
30 watts (into 6Ω)
Frequency response (+0.5dB) 5Hz - 20kHz ± 0.5dB
S/N ratio (A weighted) >92dB relative to max output
Input impedances 47kohms
THD Amplifier <0.03% 20Hz - 20kHz
Tone Control
Bass ± 12dB @ 100Hz
Treble ± 10dB @ 10kHz
X-Bass On + 8dB @ 85Hz
Aerial Input 75 Ω FM/DAB, BNC Type
DAB Bands III/L
FM Bands 87.5 - 108 MHz
CD/SD/USB CD-DA/MP3/WMA/LPCM
File Formats FAT16/FAT32
Standby power consumption <2W
Max. power consumption 150W
Dimensions 210 x 85 x 305mm
(8.3 x 3.3 x 12")
Weight 4.6kg (10.1lbs)
Technical specifications
The remote handset will not function
Check the polarity and that the batteries have not expired.
Ensure that nothing is blocking the remote sensor.
Perform a System Reset.
The unit does not pick up enough DAB stations.
Check the aerial has strong signal.
Re-orientate the aerial.
Perform a System Reset.
The display on the unit is distorted
Perform a System Reset.
The DAB source is missing
Ensure that the DAB function is enabled in the Advanced menu settings.
Perform a System Reset.
There is a hum coming from the speaker
Ensure that all cable connections are secure, particularly ground/shield connections.
There is unwanted background noise and interference
Move the unit away from other electrical equipment that is likely to cause interference.
Re-orientate the aerial.
In the event that the above solutions do not remedy your problem, please consult our
frequently asked questions (FAQ) section on our website:
www.cambridge-audio.com/sts/faqs
You can also use this facility to post a question to our Technical Support team.
For all servicing, in or out of warranty, please contact your dealer.

Other manuals for Cambridge Audio One+

Related product manuals