CAME BKS08AGS User Manual

Page 26 - Manual FA01295-EN - 03/2023 - © CAME S.p.A. - The contents of this manual may be changed at any time and without notice. - Translation of the original instructions
RIO ED T1
Associate one of the available functions with a wireless safety device.
The function only appears if the RIO CONN interface board is present.
F65 RIO ED T1 OFF (Default)
P0 = It stops the gate and excludes automatic closing. Use a control device to resume
movement.
P7 = Reopen while closing.
P8 = Reclose while opening.
RIO ED T2
Associate one of the available functions with a wireless safety device.
The function only appears if the RIO CONN interface board is present.
F66 RIO ED T2 OFF (Default)
P0 = It stops the gate and excludes automatic closing. Use a control device to resume
movement.
P7 = Reopen while closing.
P8 = Reclose while opening.
RIO PH T1
Associate one of the available functions with a wireless safety device.
The function only appears if the RIO CONN interface board is present.
F67 RIO PH T1 OFF (Default)
P1 = Reopen while closing.
P2 = Reclose while opening.
P3 = Partial stop. Only with [Automatic close] activated.
P4 = Obstacle standby.
RIO PH T2
Associate one of the available functions with a wireless safety device.
The function only appears if the RIO CONN interface board is present.
F68 RIO PH T2 OFF (Default)
P1 = Reopen while closing.
P2 = Reclose while opening.
P3 = Partial stop. Only with [Automatic close] activated.
P4 = Obstacle standby.
Partial opening time
Adjust the gate opening time.
F71 Partial opening time 5 to 40 seconds (Default 5)
New user
Register up to a maximum of 250 users and assign a function to each one.
The operation can be carried out by using a transmitter or another control device. The boards that manage the control devices (AF - R700 - R800) must be
inserted into the connectors.
U1 New user 1 = Step-by-step - The first command is to open and the second to close.
2 = Sequential - The first command is to open, the second to STOP, the third to close and
the fourth to STOP.
3 = Open
4 = Partial opening
When the operator is in [Paired] mode, the [Partial Opening] command opens the
Master operator.
Choose the function to be assigned to the user.
Press ENTER to confirm.
The free position in the memory is shown intermittently for a maximum of 10 seconds.
During this phase, send the code from the control device.
Repeat the procedure to add other users.

CAME BKS08AGS Specifications

General

Brand	CAME
Model	BKS08AGS
Category	Gate Opener
Language	English