29
2 FERNI GATE
MOTORS
1 CONTROL PANEL
1 FREQUENCY CARD
TUNED ANTENNA
2 REMOTE CONTROL
TRANSMITTERS
1 PAIR SAFETY
BEAMS
Fig 30
Other functions available:
Automatic closing
: The automatic closing timer is automatically activated at the
end of the opening cycle. The pre-set, adjustable automatic
closing time is automatically interrupted by the activation of
any safety system, and is deactivated after a STOP
command or in case of power failure.
“Operator present”
function:
Gate operates only when the pushbutton is held down (the
radio control system is deactivated)
To Next Page
Loading...
