CAME VER10DMS - Control Board Details; Control Board Components and Terminals

Page 7 - Manual FA01768-EN - 07/2022 - © CAME S.p.A. - The contents of this manual may be changed at any time and without notice. - Translation of the original instructions
Control board
1
Motor fuse
2
Accessories fuse
3
Connector for CAME KEY device / Wi-Fi – BLE Gateway / Slave module
4
RSE card connector
5
Connector for the R700 or R800 decoding card
6
Connector for plug-in radio frequency card (AF)
7
Terminal board for connecting the keypad selector
8
Not used
9
Control board connector
10
Programming buttons
11
Display
12
Terminal board for connecting the antenna
13
Connector for the DPT01 programming card
14
Terminal board for connecting the transponder selector switch
15
Terminal board for CRP connection
16
Terminal board for connecting the safety devices
17
Terminal board for connecting control devices
18
Terminal board for connecting the signalling devices
19
Line fuse
20
Power supply terminal block
21
Memory Roll card connector
22
Terminal board for connecting the RGP1 module
23
RIO CONN card connector
24
Terminal board for power supply to the control board
25
Terminal board for connecting the gearmotor
26
Terminal board for connecting the encoder
27
Courtesy light