Page 25 - Manual FA01768-EN - 07/2022 - © CAME S.p.A. - The contents of this manual may be changed at any time and without notice. - Translation of the original instructions
ERROR MESSAGES
E2
Calibration error
E3
Encoder failure error
E4
Service test failure error
E7
Operating time error
E9
Obstacle detected during closing
E10
Obstacle detected during opening
E11
The maximum number of obstacles detected consecutively has been exceeded
E14
Serial communication error
E15
Incompatible transmitter error
E17
Wireless system communication error
E18
Wireless system not configured error
To Next Page
Loading...
