Page 12 - Manual FA01768-EN - 07/2022 - © CAME S.p.A. - The contents of this manual may be changed at any time and without notice. - Translation of the original instructions
Fasten the transmission arm to the slide using the bolt supplied.
Fastening the operator to the guide
Fasten the operator to the guide using the screws supplied.
The operator can also be positioned perpendicular to the guide.
UNI 6955 Ø 6,3 x 45
Setting up the operator
Male a hole in the cable gland.
Thread the cables through the cable gland.
To Next Page
Loading...
