Pag.
17 -
Manual code
:
319U16 ver.
0.
09/2007
© CAME cancelli automatici s.p.a. -
The data and information reported in this installation manual are susceptible to change at any time and without obligation on CAME cancelli automatici s.p.a. to notify users.
ENGLISH
12 Phasing out and disposal
Our products are made with different types of materials. The majority of these (aluminium, plastic, iron and electrical cables)
are part of the solid urban waste category. They can be recycled through licensed waste disposal plants.
Other components (electronic cards, remote control batteries, etc.) constitute hazardous waste. Thus, they are to be removed
and delivered to licensed fi rms that specialise in their proper disposal.
MANUFACTURER’S DECLARATION OF CONFORMITY
Pursuant to annex II B of the Machinery Directive 98/37/EC
CAME Cancelli Automatici S.p.A.
via Martiri della Libertà, 15
31030 Dosson di Casier - Treviso - ITALY
tel (+39) 0422 4940 - fax (+39) 0422 4941
internet: www.came.it - e-mail: info@came.it
Declares under its own responsibility that the equipments for automatic garage doors and
gates listed below:
ZL90
… comply with the National Law related to the following European Directives and to the
applicable parts of the following Standards.
--- D
IRECTIVES ---
98/37/CE - 98/79/CE M
ACHINERY DIRECTIVE
98/336/CEE - 92/31/CEE ELECTROMAGNETIC COMPATIBILITY DIRECTIVE
73/23/CEE - 93/68/CE LOW VOLTAGE DIRECTIVE
89/106/CEE CONSTRUCTION PRODUCTS DIRECTIVE
--- STANDARDS ---
EN 13241-1 EN 12635 EN 61000-6-2
EN 12453 EN 12978 EN 61000-6-3
EN 12445 EN 60335-1
IMPORTANT WARNING!
Do not use the equipment specifi ed here above, before completing the full installation
In full compliance with the Machinery Directive 98/37/EC
MANAGING DIRECTOR
Mr. Andrea Menuzzo
13 Conformity declaration
Reference code to request a true copy of the original: DDF B EN A001C
To Next Page
Loading...
Need help?
General
