MW8 & MotionWare User Guide: Issue 1.2.1 Page 16
Default Action for Recent items
Choose whether to open the data with either Sleep
analysis or Daytime Activity Analysis upon double click in
the recent items list.
Automatically show the MotionWatch Manager…
Controls whether or not to automatically show the
MotionWatch Manager Window when a MotionWatch is
connected to the computer.
Updates
See section 2.9.
Save Settings and Exit
Click the ‘Close’ button to save the new settings – note
that a check for updates will be immediately performed if
the selection is checked. Click the close [x] icon at the top
right to close the window without saving the settings.
2.8 Bulk Export
This function allows you to export the raw data from every
motion file in a directory into corresponding csv files. It
may be useful if you wish to analyse the data yourself
rather than using the MotionWare software. You may
choose the directory to target using either the directory
browser window, or the file browser to choose an example
from that directory.
2.9 Updates
Checking for Updates
Your web login information is required before updates can
be downloaded. To do enter this information, open the
Settings window ( Settings), and enter your user name
and password in the specified fields. Click the Save &
Close button to save the information.
To check for updates, click on the menu button and
select the Check for Update menu item, or alternatively
click the Check for Update button on the Settings
window.
If a new version is available following dialogue will be
shown:
To Next Page
Loading...