92
You can customize a Picture Style by adjusting individual parameters
like [Sharpness] and [Contrast]. To see the resulting effects, take test
shots. To customize [Monochrome], see the next page.
1
Select [Picture Style].
Under the [2] tab, select [Picture
Style], then press <0>.
X The Picture Style selection screen will
appear.
2
Select a Picture Style.
Select a Picture Style, then press the
<B> button.
3
Select a parameter.
Select a parameter such as
[Sharpness], then press <0>.
4
Set the parameter.
Press the <U> key to adjust the
parameter as desired, then press
<0>.
Press the <M> button to save the
adjusted parameters. The Picture
Style selection screen will reappear.
X Any settings different from the default
will be displayed in blue.
Parameter Settings and Effects
A Customizing a Picture StyleN
g Sharpness 0: Less sharp outline +7: Sharp outline
h Contrast -4: Low contrast +4: High contrast
i Saturation -4: Low saturation +4: High saturation
j Color tone -4: Reddish skin tone +4: Yellowish skin tone
To Next Page
