44
You can directly select and set the shooting functions displayed on the
LCD monitor. This is called the Quick Control screen.
1
Display the Quick Control screen.
Press the <Q> button.
X The Quick Control screen will appear
(7).
2
Set the desired function.
Press the <V> <U> key on the
<9> to select the function.
X The name of the selected function is
displayed on the screen’s bottom.
Turn the <
5> or <6> dial to
change the setting.
3
Take the picture.
Press the shutter button completely to
take the picture.
X The LCD monitor turns off and the
captured image is displayed.
Q Using the Quick Control Screen
Basic Zone modes Creative Zone modes
In Basic Zone modes, the selectable functions may differ depending on the
Basic Zone shooting mode (p.67).
To Next Page
Loading...
