Shooting Function Settings
AF
I
DRIVE
I
WB
I
~:~
I
ISO
Settings
If you press the <
AF
•
DRIVE>
l <00·
WB
>,
or <
~:~
> button while the
image is displayed on the LCD monitor, the setting screen will appear
on the LCD monitor and you can turn the
< B > or <0 > dial to set the
respective function. Note that the
< [gJ > metering mode cannot be set.
If the shooting mode is
<M >, you can press the <
ISO·~
> button and
turn the
< 8 > dial to set the ISO speed.
(Q]
Quick
Control
With the image displayed on the LCD monitor, you can press the <
[Q)
>
button to set the Auto Lighting Optimizer, image-recording quality for
still photos, and movie recording size. And with
AFm,
you can select the
AF point and set the AF area selection mode.
I
1
Press
the
<
[Q)
>
button.
~
The settable functions will be
highlighted
in
blue.
• When
<
AFm
> is selected, the AF
points will also be displayed.
Select
a
function
and
set
it.
• Use <
~f:
> to select a function.
~
The setting
of
the selected function is
displayed at the screen bottom.
e Turn the
<0>
or
<8>
dial to
change the setting.
• When the selection
of
the AF point is
enabled, the AF area selection mode
for
<
AF(!m3
> can be selected with the
<
M-Fn
> button.
o
o
DO
0000
o
DO
o
---2
[II
• Exposure compensation can be set (except
in
<M> mode).
• The Picture Style, white balance, image-recording quality, and exposure
compensation (except in
<M>
mode) set for movie shooting will also be
applied to still photos.
155
To Next Page
Loading...
Need help?
General
