Before You Start
IIm!J Set the Power-off Time/Auto Power
Off
You
can change the auto power-off time for the camera to turn off
automatically after a certain period
of
non-operation. If you do not want
the camera to turn off automatically, set this to [Off]. After the power
turns off, you can turn
on
the camera again by pressing the shutter
button or other button.
1
Select
[Auto
power
off].
Il
Under the
[""]
tab, select
[Auto
power
off], then press <@>.
't
2 Set
the
desired
time.
4It
Turn the < 0 > dial to select the
setting, then press
< @>.
[iI
Even if [Off] has been set, the LCD monitor will turn off automatically after
30
min. to save power. (The camera's power does not turn off.)
44
To Next Page
