B:l Selecting the AF Area
*:
Default AF Area Selection Modes
As default setting, the following three AF area selection modes can be
selected. See the next page for the selection procedure.
Single-point
AF
(Manual
selection)
(p.89)
Select one AF point to focus.
" 0 •
Zone
AF
(Manual
selection
of
a zone) (p.90)
The 19 AF points are divided into five zones for
focusing.
Auto
select
19-point
AF
(p.90)
All the AF points are used to focus. Set
in
fully-
automatic modes
(D/~).
AFAreaSelectionModes·
Added
with
Custom
Functions
With [.Q.C.Fn III -6:
Select
AF
area
selec.
mode]
(p.212), the following
two AF area selection modes can be added.
Spot
AF
(Manual
selection)
(p.89)
For pinpoint focusing.
I
-
(~-1
• •
l~'O:~!·
,
AF
point
expansion
(Manual
selection)
(p.89)
The manually-selected AF point < 0 > and adjacent
AF points
< D > are used to focus.
87
To Next Page
