Starting the Remote UI
1-12
1
Using the Remote UI
Starting the Remote UI
To start the Remote UI, follow the procedure described below.
NOTE
For details of selection and setting of a login service, consult your system administrator.
1
Start your web browser.
2
Enter the appropriate URL into [Address] or [Location].
http://<the IP address of the device>/
NOTE
•
If a login service is not set, it is unnecessary to proceed to step 3. However, if
System Manager Settings is set, log in using the contents set for the settings, or
click [Cancel] without logging in.
•
If you do not know the appropriate URL, consult your system administrator.
To Next Page
Loading...
