h
Maintenance Cartridge Cover
Open this cover to replace the Maintenance Cartridge.
i
Maintenance Cartridge
Absorbs ink used for maintenance purposes such as head cleaning. (Replace the cartridge when it is full.)
j
Cutter Unit
A round-bladed cutter for automatic roll cutting.
k
Cutter Rail
The Cutter Unit passes over this rail to cut paper.
l
Output Tray
All printed documents are ejected from this slot.
m
Ejection Guide
Supports output paper.
n
Top Cover
Open this cover to install the Printhead and remove any jammed paper from inside the printer, as needed.
(See "Top Cover (Inside).") ➔ P.435
o
Width Guide
When loading the sheets , move the guide to match the paper size.
p
Stand
A stand that holds the printer. Equipped with casters to facilitate moving it. (See "Stand.") ➔P.438
Note
•
The Stand that can be used with this printer is Printer Stand ST-34 and Printer Stand ST-33. Either one or the other
of these Stand is included with the printer depending on the region and time when you purchased the printer.
•
The output stacker of the Printer Stand ST-33 has a regular position and an Extended position A.
For details on the extended position,
see "Using the Output Stacker."
➔P.346
•
The Stand is described in the illustration of Printer Stand ST-34. Note that the illustrations may look different from
the appearance of your printer in some cases.
iPF770
Front
User's Guide
Printer Parts Printer parts
433