Canon imagePROGRAF iPF770 User Manual

Messages regarding ink
Messages regarding ink
Ink insufficient. ................................................................................................................................................ 564
No ink left. ...................................................................................................................................................... 564
Remaining level of the ink cannot be correctly detected. Check ink tank. ........................................................ 564
Cannot detect ink level correctly. Close tank cover. ......................................................................................... 564
Close Ink Tank Cover ...................................................................................................................................... 564
Ink tank is empty. ........................................................................................................................................... 565
Not much ink is left. ........................................................................................................................................ 565
No ink tank loaded. ........................................................................................................................................ 565
Check if ink tank is set, and its color and direction. ......................................................................................... 565
The following ink tanks cannot be recognized. ................................................................................................ 565
Do not pull out ink tank. ..................................................................................................................................565
Ink insufficient.
Ink insufficient.
Cause Corrective Action
The ink level is low, so you cannot print, clean the Printhead, or
do other operations that require ink.
There is not enough ink of the color with × displayed above the
remaining ink indicator.
Press ▲ or ▼ to select Rep. Ink Tank, and then press the OK
button. Replace the Ink Tank that is low with a new Ink Tank.
(See "Replacing Ink Tanks.") ➔ P.496
Press ▲ or ▼ to select Continue to print, and then press the
OK button to resume printing. However, note that this error may
affect the printing quality.
Press the OK button, open the Ink Tank Cover, and replace the
Ink Tank for the color that does not have enough ink.
(See "Replacing Ink Tanks.") ➔ P.496
No ink left.
No ink left.
Cause Corrective Action
There is no ink left.
There are no ink colors with × displayed above the
remaining ink indicator.
Press the OK button, open the Ink Tank Cover, and replace the Ink Tank for the
color that is out of ink.
(See "Replacing Ink Tanks.") ➔ P.496
Remaining level of the ink cannot be correctly detected. Check ink tank.
Remaining level of the ink cannot be correctly detected. Check ink tank.
Cause Corrective Action
Ink level detection cannot work correctly
if you use refill ink tanks.
The refill ink tank can no longer be used. See the section Ink level detection and take
the appropriate action. (See "Ink Level Detection.") ➔ P.551
Cannot detect ink level correctly. Close tank cover.
Cannot detect ink level correctly. Close tank cover.
Cause Corrective Action
The remaining ink level could not be correctly detected. Close the Ink Tank Cover.
The buzzer stops sounding.
Next, "No ink left." is displayed and see "No ink left.." ➔P.564
Close Ink Tank Cover
Close Ink Tank Cover
Cause Corrective Action
The Ink Tank Cover is open. Close the Ink Tank Cover.
Ink insufficient.
iPF770
User's Guide
Error Message Messages regarding ink
564

Canon imagePROGRAF iPF770 Specifications

General

Color	Yes
Printing colors	Black, Cyan, Magenta, Matte black, Yellow
Print technology	Inkjet
Maximum resolution	2400 x 1200 DPI
Number of print cartridges	5
Page description languages	GARO, HP-GL/2, HP-RTL
Certification	CE, TUV, Gost-R, WEEE, ErP, EAC, RoHS, WEEE
Product color	Black, Grey
Sound pressure level (printing)	46 dB
USB connector	USB Type-A
USB 2.0 ports quantity	1
Ethernet interface type	Gigabit Ethernet
Media thickness	0.07 - 1.5 mm
Maximum print size	A0 (841 x 1189 mm)
Maximum roll length	18 m
Media width (sheets)	914.4 mm
Maximum roll diameter	150 mm
ISO A-series sizes (A0...A9)	A0, A1, A2, A3
ISO B-series sizes (B0...B9)	B1, B2, B4
Borderless printing media sizes	A0, A1, A2, A3, B4
Minimum system requirements	Windows XP, Vista, 7, 8, 8.1, Server 2003/2003R2, Server 2008/2008R2, Server 2012/2012R2 Mac X 10.6.8 - 10.10+
Power consumption (standby)	0.5 W
Power consumption (typical)	140 W
Power consumption (PowerSave)	5 W
Storage temperature (T-T)	15 - 30 °C
Operating relative humidity (H-H)	10 - 80 %
Sustainability certificates	ENERGY STAR
Accuracy	0.2 %
Scan speed (black)	3 ips
Scan speed (color)	1 ips

Weight and Dimensions

Depth	1100 mm
Width	1304 mm
Height	1062 mm