4
Select the type of paper. (See "Changing the Type of Pa-
per.") ➔P.325
Note
•
If no barcode has been printed on the roll and you have set ManageRemainRoll to On, specify the roll
length after the type of paper. (See "Specifying the Paper Length.") ➔P.326
5
Complete settings in the printer driver for the type of paper and other details.
•
Specifying Paper in the Printer Driver (Windows) ➔P.142
•
Specifying Paper in the Printer Driver (Mac OS) ➔P.249
6
Send the print job.
•
Printing in Windows ➔P.20
•
Printing from Mac OS ➔P.21
The printer now starts printing the print job.
Loading and Printing on Sheets
Loading and Printing on Sheets
These are the basic steps for loading sheets and then printing.
Follow the steps below to load and print on sheets.
Loading and Printing on Sheets
iPF770
User's Guide
Basic Printing Workflow Printing procedure
18
To Next Page
Loading...
