Other Settings
Other Settings
Specifying Printer-Related Information .................................................................................................................. 450
Conguring the Communication Mode Manually .............................................................................................. 451
Email Notication When Printing is Finished or Errors Occur ..................................................................... 452
Initializing the Network Settings ................................................................................................................................ 452
Specifying Printer-Related Information
Specifying Printer-Related Information
Follow the steps below to specify device information and security settings.
1
Start the web browser and enter the following URL in the Location (or Address ) box to display the Remo-
teUI page.
http://printer IP address or name/
Example: http://xxx.xxx.xxx.xxx/
2
Select Administrator Mode and click Logon.
Note
• If a password has been set on the printer, enter the password.
3
Click Information in the Device Manager menu at left to display the Information page.
4
To display the relevant settings page, click Edit in the upper-right corner of Device Information or Securi-
ty, depending on what information you want to specify.
To change the administrator password, click the Change Password button in the Security group.
5
Refer to the table of settings for device information and security as you complete these settings.
Security setting items are displayed when you click the Change Password button in the Security group.
Device Information Settings
Item Details Default Setting
Device Name Enter a device name.
(0–32 characters)
blank
Location Enter the location where the device is installed.
(0–32 characters)
blank
Administrator Enter the administrator's name.
(0–32 characters)
blank
Phone Enter the administrator's contact information.
(0–32 characters)
blank
Comments(E-mail) Enter any comments regarding the administrator.
(0–32 characters)
blank
Security Settings
Item Details Default Setting
New Password Enter the new password.
(0-9999999)
blank
Confirm Enter the new password again to confirm it.
(0-9999999)
blank
*1: On the Security settings screen, besides entering a password, you can specify other security-related information,
such as IP address-based SNMP or TCP usage restrictions, MAC address-based access restrictions, or IPP and FTP
authentication settings.
6
Click OK to activate the settings.
Specifying Printer-Related Information
iPF780
User's Guide
Network Setting Other Settings
450
To Next Page
Loading...
Need help?
General
Weight and Dimensions
