Messages regarding printing or adjustment
Messages regarding printing or adjustment
Cannot adjust printhead. ..............................................................................................................................................567
Borderless printng not possible. ............................................................................................................................... 562
Cannot adjust paper feed. ........................................................................................................................................... 566
Check printed document. ............................................................................................................................................ 566
Cannot adjust paper feed.
Cannot adjust paper feed.
Cause Corrective Action
The Printhead nozzles are clogged. Execute Adj. Quality again, as follows.
1.
Press the OK button to clear the error.
2.
Print a test pattern to check the nozzles.
(See "Checking for Nozzle Clogging.") ➔ P.500
3.
Clean the Printhead if the nozzles are clogged.
(See "Cleaning the Printhead.") ➔ P.501
4.
Execute Adj. Quality again.
(See "Automatic Banding Adjustment.") ➔P.484
Highly transparent film is loaded that cannot be
used for automatic feed amount adjustment.
Press the OK button to clear the error, and then adjust the feed amount manually.
(See "Manual Banding Adjustment.") ➔ P.485
Check printed document.
Check printed document.
Cause Corrective Action
The Printhead nozzles are becoming clogged. If printing is faint, clean the Printhead.
(See "Cleaning the Printhead.") ➔ P.501
Cannot adjust paper feed.
iPF780
User's Guide
Error Message Messages regarding printing or adjustment
566