6
Click the Page Setup tab to display the Page Setup
sheet.
7
In the APage Size list, click the size you registered, My Horizontal Banner.
8
Select the CEnlarged/Reduced Printing check box.
Note
•
If the C Enlarged/Reduced Printing check box is
not displayed on the Page Setup sheet, clear the
B Borderless Printing check box.
9
Select and click a roll paper in the LPaper Source list.
10
After you click EFit Roll Paper Width, the Information dialog box is displayed.
11
Select the width of the loaded roll in the Roll Paper Width list. In this case, click 16-in. Roll (406.4mm),
and then click OK.
12
Confirm the print settings and print as desired.
Note
• For tips on confirming print settings, see "Confirming Print Settings ." ➔ P.145
iPF780
Printing Vertical or Horizontal Banners (Large-Format Printing; Windows)
User's Guide
Enhanced Printing Options Printing banners or at other non-standard sizes
91
To Next Page
Loading...
