Canon IMAGERUNNER 2016 - Fax Settings

Additional Functions Settings Table
5-8
Customizing Settings
5
■ FAX SETTINGS**
Additional Functions Settings
Applicable
Page
1. USER SETTINGS
UNIT TELEPHONE#
*2
UNIT NAME
TX TERMINAL ID:
PRINTING POSITION: OUTSIDE
IMAGE*, INSIDE
IMAGE
TELEPHONE# MARK: FAX*, TEL
SCANNING DENSITY: 1 to 9; 5*
TEL LINE TYPE: TOUCH TONE*, ROTARY
PULSE
VOLUME CONTROL: MONITOR VOL.
CTRL (0 to 3; 1*)
STANDARD SETTINGS:
DENSITY: STANDARD*, DK, LT
IMAGE QUALITY: STANDARD*, FINE,
PHOTO, SUPER
FINE, ULTRA FINE
DIRECT TX: ON, OFF*
STAMP DOCUMENT: ON, OFF*
INIT. FAX STD SET: ON, OFF*
2. TX SETTINGS
ECM TX: ON*, OFF
PAUSE TIME: 1 to 15 seconds; 2 SEC.*
AUTO REDIAL: ON*, OFF
REDIAL TIMES: 1 to 10; 2 TIMES*
REDIAL INTERVAL: 2 to 99 minutes;
2 MIN.*
TX ERROR REDIAL: ON*, OFF
TIME OUT: ON*, OFF
STAMP DOCUMENT: DIRECT&MEMORY
TX*, DIRECT TX
DIALING LINE CHCK: ON*, OFF
ROTATE TX: ON*, OFF
An asterisk (*) indicates the default settings.
Two asterisks (**) indicate items that appear only when the appropriate optional
equipment is attached.
*2: See the Facsimile Guide.