Canon iR2016J - Checking the Connection to the Network; 1 Checking the Network Connection

Chapter 1
15
1.3 Checking the Connec-
tion to the Network
1.3.1 Checking the Net-
work Connection
0011-1079
iR2016 / iR2020 / iR2016i / iR2020i
If the machine supports a network feature, check the
network connection following the procedure below.
1) Press the following keys to display the service
mode screen:
Additional Functions Key > 2 Key > 8 Key > Addi-
tional Functions Key
2) Select "# REPORT" using the + or - key, and then
press the OK key.
3) Select "REPORT OUTPUT" using the + or - key,
and then press the OK key.
4) Select "SPEC LIST" using the + or - key, and then
press the OK key.
5) When "SPEC REPORT" is displayed, check that
"BDL-IMAGE" is set to ON.
MEMO:
"SPEC REPORT"
- TOTAL MEMORY: 128MB
BDL-IMAGE (600) must be set to ON.
- TOTAL MEMORY: 256MB
BDL-IMAGE (1200) must be set to ON.
6) Contact the system administrator of the customer to
make network settings.