Canon LBP 3370 - Page 291

8-32
Tr oubleshooting
8
Message List
<58 JOB MEM.FULL> <Auto Error Skip>
Cause There is not sufficient free RAM space to process jobs.
Remedy 1 If you are processing multiple jobs at once, press the (Online) key to cancel
printing, wait for other jobs complete, and then print again.
Remedy 2 If the job data is too large, divide the job and print again.
<59 JOB RX ERROR> <Auto Error Skip>
Cause The printer received any unanalyzable data while it is receiving a job, or it
timed out.
Remedy 1 Press the (Online) key to cancel printing, then print again.
Remedy 2 A problem may be occurring in the network you are using. Check the status of
the network that your are using.
<A4 nn ERROR> ("nn" represents two-digit alphanumeric characters)
Cause A problem has occurred and the printer does not operate properly.
Remedy Cycle the power of the printer. If the message appears even after cycling the
power of the printer, note down the message in the display, and contact your
local authorized Canon dealer.
<A5 nn ERROR> ("nn" represents two-digit alphanumeric characters)
Cause A problem has occurred and the printer does not operate properly.
Remedy Cycle the power of the printer. If the message appears even after cycling the
power of the printer, note down the message in the display, and contact your
local authorized Canon dealer.
<A7 nn ERROR> ("nn" represents two-digit alphanumeric characters)
Cause A problem has occurred and the printer does not operate properly.
Remedy Cycle the power of the printer. If the message appears even after cycling the
power of the printer, note down the message in the display, and contact your
local authorized Canon dealer.