Canon LBP 3370 - Page 290

8-31
Tr oubleshooting
8
Message List
<41 CHK PAPER SZE>
Cause 1 The size of the paper loaded in the multi-purpose tray or paper cassette is
different from the setting for TRAY PAPER SIZE, CASSETTE1 SIZE, or
CASSETTE2 SIZE specified from the computer or control panel.
Remedy Match the size specified in TRAY PAPER SIZE, CASSETTE1 SIZE, or
CASSETTE2 SIZE and the size of the loaded paper, and then press the
(Online) key.
Cause 2 You are using UFR II Printer Driver, and you loaded custom paper of its
long edges 215.9 mm or less and printed when TRAY PAPER SIZE,
CASSETTE1 SIZE, or CASSETTE2 SIZE in the FEEDER MENU options in
the SETUP menu was set to MIXED SIZE.
Remedy Load the paper in landscape orientation, then print again.
Cause 3 CHK PAPER SIZE in the USER MAIN. options in the SETUP menu is set to
OFF.
Remedy Set CHK PAPER SIZE (See p. 6-38) to ON, then print again.
<52 RAST.MODE ERR> <Auto Error Skip>
Cause The printer received data in format that it does not support during printing
in the Raster mode.
Remedy 1 The printer continues printing by pressing the (Online) key. However, the
data may not be printed properly.
Remedy 2 Print again using a printer driver that supports image data formats.
<53 SEC.PRINT ERR> <Auto Error Skip>
Cause Secured print data is sent from a printer driver that is not for LBP3370.
Remedy Press the (Online) key to cancel the job.
<53 STORE ERROR> <Auto Error Skip>
Cause The data for which a stored job print is specified is sent from a printer
driver that is not for LBP3370.
Remedy Press the (Online) key to cancel the job.