Installing the Paper Feeder
9-4
Installing the Optional Accessories
9
1
Perform the following procedure.
Turn the printer OFF a.
If a USB cable is connected, turn the computer off b, and then disconnect the
USB cable c.
Disconnect the power plug from the AC power outlet d.
It is recommended that you shut down the printer before turning it OFF. (See
"Shutting Down the Printer," on p. 3-4)
If you are using WSD, the shutdown notifies the computer that the printer is
turned OFF.
2
Remove all the interface cables and the power cord from the
printer.
b
c
d
a
To Next Page
Loading...
Need help?
General