Canon MX470 - Deleting Registered Information

Deleting Registered Information
To delete information registered for coded memory dial and group dial, follow the procedure below.
1. Make sure that the machine is turned on.
2. Press the Setup button.
The Setup menu screen is displayed.
3.
Use the button to select Fax settings, then press the OK button.
4.
Use the button to select TEL no. registration, then press the OK button.
5.
Delete the registered information.
•
To delete a coded memory dial code:
1. Use the button to select Memory dial, then press the OK button.
2.
Use the button or the Numeric buttons to select a coded memory dial code to delete,
then press the OK button.
3. Use the button to select Delete, then press the OK button.
4. Use the button to select Yes, then press the OK button.
• To delete a group dial code:
1. Use the button to select Group dial, then press the OK button.
2. Use the button or the Numeric buttons to select a group dial code to delete, then press
the OK button.
3. Use the button to select Delete, then press the OK button.
4. Use the button to select Yes, then press the OK button.
Note
• To return to the Fax standby screen, press the FAX button.
653