Canon MX470 - An Unintended Language Is Displayed on the LCD

An Unintended Language Is Displayed on the LCD
Select the language you want to be displayed according to the following procedure.
1. Press the Setup button, then wait for about 5 seconds.
2. Press the button twice, then press the OK button.
3.
Press the button twice, then press the OK button.
4.
Press the button repeatedly to select the rightmost menu.
5.
Press the button twice, then press the OK button.
6.
Use the button to select the language for the LCD, then press the OK button.
The desired language is displayed on the LCD.
7.
Press the Stop button.
804