Canon Oce PlotWave 360 - Page 100

Application /Functionality INBOUND ports on the con‐
troller: protocol
OUTBOUND ports from the
controller: protocol
Print from Cloud: WebDAV TCP 80: HTTP
TCP 443: HTTPS
TCP web proxy port
(4)
TCP WebDAV port
Notes:
* Océ back-channel is an Océ proprietary protocol used to retrieve information from the printer
(status, media loaded...) and to display it in the application or driver.
(1)
For Océ Publisher Mobile v 2.2 and later for Android, and for Océ Publisher Mobile v 2.3 and
later for iOS
(2)
Only for Océ Publisher Mobile v 2.0 to v2.2 for iOS
(3)
FTP passive mode only (FTP active mode not supported).
(4)
When there is a proxy.
Scanning applications: INBOUND and OUTBOUND ports and protocols used by the system
Application /Functionality INBOUND ports on the con‐
troller: protocol
OUTBOUND ports from the
controller: protocol
Scan to File: SMB TCP 139, 445
UDP 137, 138, 445
Scan to File: FTP
FTP command
(1)
:
- Local: TCP any
- Remote: TCP 21
FTP Data
(1)
:
- Local : TCP any
- Remote: TCP any
Scan to File: Cloud (WebDAV) TCP 80: HTTP
TCP 443: HTTPS
TCP web proxy port
(2)
TCP WebDAV port
Scan data retrieval from Smart
Inbox (Scans)
TCP 80: HTTP
TCP 443: HTTPS
Notes:
(1)
FTP passive mode only (FTP active mode not supported).
(2)
When there is a proxy.
Control management: INBOUND and OUTBOUND ports and protocols used by the system
Application /Functionality
INBOUND ports on the con‐
troller: protocol
OUTBOUND ports from the
controller: protocol
PING IPv4 ICMPv4
PING IPv6 ICMPv6
4
Applications, protocols and ports
100
Chapter 3 - Security on Océ PlotWave 500 and PlotWave 340/360