Roles and Passwords
Roles and profiles in the Océ PlotWave 750 and Océ Plotwave 900 R2.x
Roles description
In the system, the main network and system settings are protected against change. Only
authorised users can configure/change these settings.
4 roles are available:
• Key operator:
The Key operator can manage the jobs and the device settings
• System administrator
The System administrator can manage the Configuration settings such as the Network settings,
scan destinations settings, security settings (e-shredding, IPsec), and the hardware/software
configuration settings...
• Power user
The Power user has both the rights of the Key operator and the System administrator
• Service
This role is used exclusively by the Canon Service technician
Passwords policy and behaviour for Océ PlotWave 750 and Océ PlotWave 900
R2.x
Introduction
In Océ Express WebTools the passwords protect:
• The roles
• The Scan to File remote user name
• The security settings (preshared key for IPsec)
• The mobile printing password
On the printer panel, a password protects the administration settings.
Passwords in Océ Express WebTools
Password modification table for Océ PlotWave 750 and Océ PlotWave 900 R2.x
Password for Can be changed by Stored in the back up set*
Key operator Key operator or Power user No
System administrator System administrator or Power
user
No
Power user Power user No
Service System administrator or Power
user
No
Mobile printing password (for
Océ Mobile WebTools)
System administrator or Power
user
No
Any Scan To File remote user
name
System administrator or Power
user
No
Any preshared key for IPsec System administrator or Power
user
No
4
Roles and Passwords
76
Chapter 2 - Security on Océ PlotWave 300/350, PlotWave 750, PlotWave 900 and ColorWave 300
To Next Page
Loading...
